Grain Puff Production Line Manufacturer
GP100, GP200, GP300
Baked Extruded line、Corn Snack Extruded Line、Direct Expand Extruded Line、Popper Production Line、Cheese ball Production line、Puff corn Production Line、Corn Cracker Production Line、Thai Roll Snack Production Line、ขนมข้าวโพดอัดแท่งแบบแบน、ขนมข้าวโพดอัดแท่ง、ขนมข้าวโพดอัดแท่งสไตล์ญี่ปุ่น、泰國捲生產線、米果捲生產線、乖乖生產線
TsungHsing Food Machinery is a grain puff production line mahcine manufacturer and supplier. TsungHsing Food Machinery (TSHS) provides a machinery manufacturing, making the raw materials (grains like corn and rice) processing instantly into required shape, then baked and flavor added to be tasty snacks.
The Grain Puff Production Line of TSHS is easy to control and economize manpower by automatic production line, and the equipment is made of stainless steel which is easy to clean and accord to the requirements of food hygiene regulations.
The whole production cycle uses rice or corn mash or other grains as raw materials, producing delicious products through the steps of mixing and humidification, grain bursting, cutting, drying or baking, and seasoning.
By changing the mold, different shapes of products can be made on the same production line. With the injection machine, it can produce products with fillings, increase the taste of the products, suitable for all ages, and is one of the most popular snacks in the world.
- 100 kg/hr (GP100)
- 200 kg/hr (GP200)
- 300 kg/hr (GP300)
- Optional capacity from 100 kgs/hr, 200 kgs/hr, 300 kgs/hr according to the requirements.
- Easy to control by automatic production line.
- Optional fillings for cooking makes it easy to prepare all of the raw materials.
- Using the corn or rice mash as the raw material, having the benefit of easy to getting and low-budget.
- No wasting from being fully utilized of the raw materials.
- The raw material mixer can be used in one-to-two with cereal burst machine, saving equipment investment cost.
- Provides moisture meter to measure the moisture content of raw materials before and after humidification.
- Good taste from single-axis spiral extruding and leavening.
- Adjustable feeding speed according to the production requirements.
- Variety of different shape product by replacing mold easily.
- The cutting device of the extruder has a cover to ensure safe operation.
- Adjustable baking or drying temperature and time.
- Equipped with the temperature display and control device
- Insulation device to improve thermal efficiency.
- Optional round and rectangular product cutting machine according to the requirements.
- The liquid sprayer has electric heat insulation to maintain liquid fluidity.
- The powder sprinkler feeds the seasonings with a screw, and the amount of powder can be adjusted according to the requirements.
- Integrated, safe and hygienic seasoning drum.
- The equipment of the whole production cycle is made of stainless steel which is hygiene and easy to clean.
Raw Material Mixing and Humidification → Shape by Spiral Extruding (if it is with filling, the filling is done at the same time as the extrusion) → Baking or Drying → Liquid (Oil) Sprayer → Seasoning → Cooling → Packing
(This is the basic configuration, please contact us for other special processes.)
Equipment Description At Each Stage1. Humidifying Mixer
he first stage of the production of Grain Puff is the mixing of raw materials, with normal temperature, clean water and raw materials such as rice, corn mash, or other grain mixed to a moisture content suitable for extrusion. The humidifier equipment in the Grain Puff Production Line of THSH have vertical and horizontal forms, which are used according to the raw materials used by customers.
2. Grain Puff Extruder (Cereal Burst Machine)
The cereal burst machine of the Grain Puff Production Line is a single-axis spiral structure, with the design of the mold produce the required shape. The mixer sends the raw material to the storage drum of the cereal burst machine, and the mold is heated by electric heating. When the temperature reaches the required temperature, the extrusion starts, the product expands due to the friction of the high temperature and the spiral pressure, and the product is semi-cooked during the leavening process. Products without filling can be cut directly at the exit of the mold according to the required length. The cutting machine has a protective cover to ensure safety. It also has the features of adjustable feeding speed and cutting speed, which can be continuously operated, less loss of raw materials, simple operation and convenient maintenance. The mold can be replaced, and the same production line can produce a variety of products with high economic benefits.
The filler of the Grain Puff Production Line is an optional equipment and is only used in products with fillings. The filler has a double-layered pot to store the stuffing, the interlayer has insulation to prevent the filling from solidifying, and the filling is connected to the extruder through the metal hose by the pump, and the filling is injected into the product while the product is extruded and not yet solidified to add flavor and taste.
4. Cutting Machine
The cutting machine of the Grain Puff Production Line of THSH has a round and a rectangular product cut, which are used in products with filling. Mainly to control the length of the product, the round product is controlled by the spacing between the die-cut molds. The rectangular product is first flattened by rounding the product, and then control the required length by adjusting the cutter and the feeding speed.
5. Infra-Red Tunnel Oven
The oven of the Grain Puff Production Line is mainly used for filling products, tunnel design, There has conveyor and leveling device to spread the product evenly on the conveyor inside, and use infrared fire tube as heating medium. Located above and below the conveyor, each fire tube is independently controlled by turning on and off. The firepower can be adjusted according to the product requirements. The unique penetration of the infrared fire tube is used to make the product evenly heated, and the flavor is unique and crispy. The heating zone of the oven is equipped with a heat preservation device, which can keep the heat energy in the machine, saving energy and having friendly working environment.
6. Conveyor Type Auto Dryer
The conveyor type auto dryer is used in products without filling. The temperature is lower than that of the oven. The dryer can be a single-layer or multi-layer conveyor. It is prepared according to the output and drying time. The air is heated by the burner and the hot air is sent to the drying area for circulation by windmill. The drying temperature and drying time can be set according to the product requirements. The heating zone of the dryer is equipped with a heat preservation device, which can keep the heat energy in the machine, saving energy and having friendly working environment.
7. Seasoning System
The seasoning system of the Grain Puff Production Line of THSH is composed of a liquid (oil) sprayer, a powder sprinkler and a seasoning drum. In the pump, the seasoning liquid or oil is sprayed on the product through the nozzle, so that the product has the appropriate humidity to absorb the seasoning powder. The seasoning powder is spiral and quantitative feeding to the seasoning drum, so that the product and the seasoning are evenly mixed when the seasoning drum is turned over, thereby increasing the flavor of the product. The seasoning drum of the Grain Puff Production Line is integrally formed, hygiene and easy to cleaning, and can be applied to various snack foods, which is an indispensable part of food processing.
8. Discharge Conveyor
Discharge Conveyor The conveyor is used to deliver the seasoned product, which has a cooling effect on the one hand, and can be automated connected to the packaging system, economizes manpower, increases hygiene and maintains product quality on the other hand.
Optional Equipments：1. Conveyor
3. V Type Mixer
For the purpose of continuous production, it is recommended to purchase the following spare parts.
Cereal Burst Machine: Screw Barrel (snail cylinder).
Infra-Red Tunnel Oven: Infrared Fire Tube
With mold replacement, you can make a variety of different shapes of products.
|Puff Corn||Corn Snack||Spherical||Star-shaped||Corn Bar||Filling Bar||Grain Puff|
The customer we cooperated with the famous factory which devoted to grain puff production in Thailand. Our customer is one of snack production factory from SEVEN-ELEVEN(7-11), which is the well-known convenient store in Japan.......
- Related Products
TsungHsing Food Machinery is a corn curl production line machine manufacturer and supplier. TsungHsing Food Machinery (TSHS) provides a complete Corn Curl Production Line, from the processing of the raw material shape by extruding and inflating to be fried and seasoned. The Corn Curl Production Line of TSHS uses the corn, which is the simplest raw material and easy to obtain around the world. Shape by extruding and inflating, and then put into the continuous fryer and season it. It becomes the tasty snack and suitable for all ages. Corn grit, the raw material of the Corn Curl Production Line, having a special characteristic after mixed with water: It will become thick and hard by quick hit, but not by slow collision. Therefore, the Corn Curl Production Line uses this characteristic to mix and heat the corn grit and water, and then extrudes them by mold. Because of the steam inside contacts with air that increases the volume of the Corn Curl and to be extruded. At last, the striped tasty snack comes out and suitable for all ages. This product is widely used all over the world, and the well-known names are Twisty、Cheetos、KuKure、CornCurl.Most corn curls in the market are fried food. First, mixing corn and water, and then heating. Second, shaping and extruding by mold. Because the steam inside contacts with air that increases the volume. At last, the striped snack comes out.
TsungHsing Food Machinery is a nuts processing production machine manufacturer and supplier. TsungHsing Food Machinery (TSHS) provides manufacturing equipment for processing raw materials such as nut processing, frying, baking, roasting, seasoning and coating. Nut snack foods are widely accepted and popular products all over the world. Both the Western and Eastern culture, and even different food cultures are accepted. Commonly used in processing methods are frying, roasting, drying, baking…etc. It is also divided into coating and non-coating. Nut products are widely accepted by the people in the world's snack food culture, regardless of Western or Eastern culture, and the nut processed products are considered the most original item for snack foods. From the baking and frying of the nut products to the later derivatives such as coating with powder or liquid, garlic peanuts. Agricultural products such as peanuts, green beans, cashews, and almonds…as the raw materials, which are widely used and easily obtained all over the world, are fried or baked and then seasoned to produce snack foods that are suitable for all ages and delicious. The finished-products of nuts on the current market could be classified by product category into coating with powder or liquid and without coating with anything; classified by ripening process into frying and roasting. According to the different processes and seasonings, the processing methods of nuts are kaleidoscopic and easy to develop new products. It is a product which could be worthy invested enormous time and effort in term of the industries of leisure food.
TsungHsing Food Machinery is a noodle snacks production line machine manufacturer and supplier. Noodle snakes (also known as snack noodles、 ขนมขาไก่、麺スナック、نودل سناك) are the bulk of the snack food market in Asia. Using the simple raw material - flour, which is easy to obtain around the world, mixed with water and other raw material to stir into dough, then stretched into crust, cut with a knife, and after frying and seasoning, it can produce the snack foods which are suitable for all ages and delicious. For casual food, the most common are fried noodle snack and crispy noodles. Among the long-term products in the Taiwan market, the most famous one are the “everyone says GOOD GOOD EAT” series products of Wei Lih Food company; In Japan is the Baby Star Crispy Noodle Snack of OYATSU company (ベビースターラーメン); in Malaysia is the New Star company's brand Snek ku is also quite popular; in the Thai market, the fried noodel snakes were made into the shape of chicken legs, let the word chicken leg (ขนมขาไก่) become a synonym for fried noodle snakes in Thailand. TsungHsing Food Machinery provides an automated, high-quality noodle snake production line is safe and hygienic, and can be produced easily and quickly.
TsungHsing Food Machinery is a green pea production line machine manufacturer and supplier. TsungHsing Food Machinery is a professional manufacturer of Frying Green Pea Production Line equipment. Frying Green Pea is currently one of the most popular snack foods in the world. The more common ones are Garlic Green Pea and Coating Green Pea. TsungHsing Food Machinery provides automatic, high-quality and high-yield Frying Green Pea Production Line, and also develops special process combinations to reduce the damage rate of products during production. The most worrying customers are the quality of the products during the production of Frying Green Pea. In the production process, the increase in the defect rate of the product is often caused by the improper control of the frying temperature, which causes the customer's product to have burst of the pea or the different appearance. The continuous frying machine of TsungHsing Food Machinery uses a temperature-stable mechanism to help customers to prevent burst of the pea of the frying process and enhance the product quality.
TsungHsing Food Machinery is a potato chips production line machine manufacturer and supplier. TsungHsing Food Machinery (TSHS) is a manufacturer of snack food production line equipment for processing potato chips from agricultural products. The Potato Chips Production Line of THSH is automatic, which is easy to operate and economizes manpower. The equipment is made of stainless steel, which is easy to clean and meets hygienic standards. Using fresh potatoes as raw materials, the whole process of washing, peeling, slicing, washing, de-watering, frying, seasoning and other steps to make delicious potato chips. The crispy taste with different flavors and packaging, suitable for all ages, and it is one of the most popular snack food in the world. The Potato Chips Production Line of TSHS, with the continuous fryer as the core, is equipped with conveyor, washing m/c, peeling m/c, slicers, washing m/c, de-water device, seasoning device…etc, combined into automatic production line, which economizes manpower.
TsungHsing Food Machinery is a fish shred production line machine manufacturer and supplier. TsungHsing Food Machinery (TSHS) provides snack foods through the processing of production equipment for the processing of surimi as the main raw material. It is a derivative application of fish products. The Pollack Fish Snack can be said to be a classical Taiwanese snack, and many people have fond childhood memories of it. It is said that the pollack fish snack was invented by the Japanese and later passed to Taiwan. It was considered a high class import food that gradually became an important product in the surimi processing industry in Taiwan. Related applications are widely used in various Asian countries.
TsungHsing Food Machinery is a pellet snacks production line machine manufacturer and supplier. Snack pellet generally refer to cereal, potato and bean with less water content as the main raw materials through the process of extruding, heating to increase volume itself. Due to fluffy texture of food, crispy and sweet, which is very popular.
TsungHsing Food Machinery is a fish murukku production line machine manufacturer and supplier. TsungHsing Food Machinery (TSHS) provides the equipment of the Fish Murukku Production Line. From the process of the raw material shape by extruding, to the process of frying, seasoning to finished snack foods. Murukku is the most popular and delicious snack in India and Southeast Asia. It originated in southern and western Indian cuisine. The earliest version of the snack is made by hand-kneading rice flour, flour, soy flour and seasoning. First, put into a small container the be extruded into a flat spiral, and then fried in vegetable oil until crisp. Today's food manufacturers also manufacture and sell such snack foods in factories, not only in India and Southeast Asia, but also around the world. In some areas, especially in the UK, fish murukku are often sold with processed snack foods such as potato chips.
TsungHsing Food Machinery is a banana chips production line machine manufacturer and supplier. Providing the production equipment for banana processing, slicing, frying and seasoning of agricultural products.
Grain Puff Production Line
- Finished Product Gallery
- Product catalog Download
- The exhibition in Thailand
Food Pack Asia 2020Read More
Country ：Thailand Bangkok
DATE：2020.02.12 ~ 2020.02.15
PLACE：Bangkok International Trade & Exhibition Centre (BITEC)
- The exhibition in Singapore
In response to the new coronavirus (COVID-19) epidemic. After the careful consideration, the organizer decided to postpone the exhibition of FHA-Food & Beverage 2020.Read More
Currently, the new exhibition...
- The exhibition of India
The exhibition will be cancel.